Common application examples of wear-resistant submerged pump

Common application examples of wear-resistant submerged pump

Postby sdbfsteel » Thu May 26, 2022 6:14 am

The wear-resistant submerged pump has strong practicability and is suitable for all kinds of corrosive liquids, with particles, high viscosity, volatile, flammable, explosive, highly toxic liquids, ceramic glaze paste, fruit pulp, glue, tanker tank bottom oil recovery , temporary pouring cans and other liquids can be exhausted, especially to solve the problems of vane pump running, running, dripping, leaking and not allowing idling. This series of products can use ordinary clean industrial gas or instrument gas. It starts at a low pressure of 0.1 kg, saves more than 30% of gas consumption under normal transmission conditions, and has a good market prospect.

Application examples of wear-resistant submerged pump:

1. The bottom of the oil tank is cleaned, although there is a pad water pumping method, it cannot guarantee that the oil will be completely pumped, and there must always be an oil layer with a thickness of at least 3-5mm on the surface. Taking a 5000m3 oil tank as an example, the loss of oil is about 1-1.5t each time. For oil tanks with low-level dewatering tanks, although the remaining oil and water can be discharged to the oily sewage treatment plant for recycling, most of the volatile oil products are volatilized during the transportation process and pollute the environment.

2. Temporary tank dumping, loading and unloading trucks, and oil sampling. In the process of refining production scheduling, oil products are often temporarily dumped, loaded, and sampled and inspected for oil in the tank. Or in order not to contaminate the normal pipeline, connecting the temporary pipeline with a diaphragm pump can quickly and conveniently complete this task.

3. A 3000t oil tanker is unloaded with a fixed screw pump, and at least 50t of oil should be left between the warehouse partitions. If a diaphragm pump with a larger displacement is used, good results can be obtained.

4. Transportation of gas and hydrogen sulfide residue The gas residue and sulfur-containing water at the bottom of the refinery torch need to be discharged and treated in a centralized manner, otherwise acid corrosion equipment will be formed.

5. Ceramic industry: use this pump to pump glaze slurry, and can be used to send pressure to filter press.

6. Removal of waterlogging and dirty oil in sewer wells and underditches When overhauling pipelines, valves and underdrains in sewer wells, it is necessary to remove waterlogging and dirty oil. Although submersible pumps can be used to pump out all the flooded water, these places are often far away from the power supply, which is very inconvenient. When using a diaphragm pump, a pressure gas cylinder can be used as power to recover dirty oil and drain water.

7. Cleaning of sewage treatment plant and sludge tank The sludge tank of sewage treatment plant often accumulates a large amount of sludge and silt, which needs to be cleaned. The diaphragm pump is used for flexible suction, which is convenient and labor-saving, labor-saving and time-saving.

8. Due to the low terrain and fire protection areas in the liquefied gas pump room and laboratory, it is safer to use diaphragm pumps to drain water, which is many times more efficient than water pumping and steam pumping.

9. In addition, this pump has its own advantages in the application of naphthenic acid refining and transfer, loading sodium sulfite liquid transportation, benzene raw material loading and unloading, etc.

wear-resistant submerged pump https://www.luolintec.com/Corrosion-resistant-pump
sdbfsteel
 
Posts: 2
Joined: Tue Aug 17, 2021 10:00 am

Return to Social

Who is online

Users browsing this forum: No registered users and 9 guests

cron